BONE SAW PLM-160

In 2018, our company has mastered manufacturing of brand-new equipment, taking into account the modern requirements for quality, design and production capacities!

PLM-160 band saw for meat products is designed for fast cutting of chilled or frozen meat, bone-in meat or bones into portions of various size.

It is manufactured in УХЛ 4 (moderate and cold climate, adjustable environment) modification in accordance with GOST 15150-69.

The saw is notable for reliability, safety and compliance with Technical Regulations of the Customs Union, ease of maintenance and durability.

PLM-160 saw is manufactured in accordance with the requirements of STB ISO 9001-2015 standard and is approved in accordance with the Declaration of Conformity of the Eurasian Economic Union (see Annex).

High-quality stainless steel housing is manufactured in table-mounted modification.

Maximum cutting height is 240 mm. The saw is equipped with a device for last product portion cutting.

Linear scale with 5-mm divisions is marked on the table for convenient cutting of pieces of the required thickness.

Basic technical specifications of the saw

Parameter name	PLM-160
Technical performance (kg/h*)
Power consumption (kW)	1,1
Installed power (kW)	0,75
Thickness, width and length of saw band (mm)	0,6х16х1650
Cutting height (maximum, mm)	240
Power supply: - current type - rated voltage (V) - current frequency (Hz)	single-phase alternating 220 50
Overall dimensions (mm, maximum) - length - width - height	480 465 950
Weight (kg, maximum)	48

* - Technical performance of the saw depends on the speed of product feeding by operator, the dimensions, density and the grade of pieces of the product being processed.

Machine composition

	Description	Quantity
PLM -160	Saw	1
PLM -160	Cable with plug (power cable) ПВС-ВП 3х1.0, total length (m)	3,5

PLM-160 D1	Quick user’s guide	1 (included in OM)
PLM-160 D2	Safety instructions for saw usage	1 (included in OM)

Saw composition and functionality

The saw is actuated by electric motor 17. Band 16 is driven by pulleys. The band is tensioned by rotating nut 7. The product is cut by passing it through band 16. Cutting width can be adjusted using limiter 5.

Do not use the saw without pusher 3.

1 - housing; 2 - door; 3 - pusher; 4 - table; 5 - limiter; 6 - pulleys; 7 - nut; 8 - support; 9 - tray; 10 – electrical equipment; 11 - casing; 12 - cover; 13 - cam; 14 - “Start-Stop” button; 15 - protection device; 16 - saw band; 17 - electrical motor; 18 – saw band flying-off preventer; 19 - brushes

Transportation

The machine should be transported from the place of receipt to the place of installation and mounting in factory package by any type of covered vehicles in upright position (except for aircrafts) in accordance with the rules for transportation of goods applicable for this means of transportation.

After machine unpacking, check the completeness of delivery in accordance with paragraph 1.3 of the Operating Manual.

Mounting

The place of machine installation should ensure safety and ease of operation and maintenance. It should comply with sanitary standards, fire safety requirements and labor safety instructions. It should prevent the machine from sliding, tilting or overturn in any operation mode.

All the works upon machine connection to power line and putting it into operation should be performed by a representative of servicing company in accordance with “Electrical Installations Code”, TKP 181-2009 “Rules for the Operation of Consumers’ Electrical Installations” or in accordance with similar applicable regulations of the importing country.

Warranty liabilities

Warranty period is 24 months. It starts from the day of putting the machine into operation, but not later than 6 months from the date of machine purchase. Saw band is not covered by the warranty.

Manufacturing company shall eliminate equipment malfunctions during warranty period, provided that the following conditions are observed:

Observance of all the requirements of “Operating Manual” regarding the machine.
Putting into operation and monthly maintenance is performed by a specialized company (under consumer agreement) in accordance with the list of companies or by other repair companies under written permission of the manufacturer.
Handing over (sending) the copy of signed “Act of machine commissioning” (Annex И) to manufacturing company within 14 days from the day of putting the machine into operation.
Sending the “Damage claim” (Annex К), containing the information on machine malfunction, failure of its parts or utilities to manufacturing company.

In case of non-observance of any of the above-specified conditions, the manufacturing company will disclaim all its warranty liabilities.

Note: the drawn-up “Act of machine commissioning” and “Damage claim” shall be stamped by the consumer and by repair/maintenance company.