DOUGH MIXER MT-12

The equipment is included in the Eurasian Registry of Industrial Products of the Ministry for Industry and Trade of Russian Federation.

The equipment is included in the Eurasian Registry of Industrial Products of EAEU Member States (manufacturer’s identification No. 200166490).

The company is included in the Registry of bona fide partners of BelCCI.

This machine is designed for mixing yeast dough at small bakeries, confectionaries and catering enterprises. The electric drive of the machine rotates the bowl and the spiral simultaneously, and this ensures thorough mixing dough. Special form of the spiral allows kneading even small amount of dough. For protecting the staff from injuries a cover is installed on the bowl and its modern comfortable design facilitates the addition of ingredients.

The machine has “У” climatic modification (moderate climate) and placement category 3 (enclosed rooms with natural ventilation) as per GOST 15150-69 for operation at temperatures from +1°С to +40°С.

Main technical specifications of the machine

Name params	value
Productivity, kg/h, not less	50
Capacity of the bowl, l	16
imultaneous loading of dough ingredients, kg, not more - yeast dough - stiff dough (with a moisture of not less than 46%)	12 4
Power of the installed engine, kw/h	0,55
Nominal power consumption, kw, not more	0,81
Supply main: - type of current - nominal voltage,V - frequency, Hz	A/C 220 50
Overall dimensions, mm, not more: - length - width - height	625 350 685
Weight, kg, not more	63

Machine arrangement

Designation	Name	Quantity
МТ-12	Dough mixer	1
ШХ-2К.1.12.00.000	Support	4
	Input device with built-in automatic switch of type BA 47-29, 50 Hz, time-current characteristic “C” 230/415 TU 2000 АГИЕ.641.235.003 2 poles, 5.0 A An automatic switch of specified parameters is an integral part of the machine. Violation of this requirement may result in machine malfunction.	1 Note: included by customer
	3SD6 outdoor-mounted control board with “neutral bus” and grounding bus for double-pole automatic switch	1 Note:included by customer
	Н05VV5-F 5G1 cable (or another similar)	3.2 m Note: for machine connection to automatic switch
Package set
	Package box	1
Documentation
МТ-12 РЭ	Operating manual	1

Dough mixer arrangement and operation

The trough filled with dough mix is rotated by electric drive. Simultaneously with trough rotation, screw rotates and mixes the dough. The trough rotating around its axis together with the screw rotating inside the trough ensure thorough dough kneading.

To prevent the personnel from injuries, the trough is equipped with a cover with microswitches. When any of them is actuated, the machine stops.

1 - Electric motor; 2 - Reducer; 3 - Machine housing; 4 - Chain drive; 5 - Mixing device - a screw; 6 – Dough trough; 7 - Cover; 8 - “START” button; 9 – “STOP” button; 10 - Support

Transportation

Factory packed machine should be transported from the place of delivery to the place of installation and mounting by any covered means of transportation, excluding air transport, in a vertical position, in accordance with goods carriage regulations applicable for these types of transport. After unpacking, check the delivery set for completeness in accordance with Operating Manual clause 1.3.

Mounting

The machine is installed in an easily accessible place on a flat base (table, cabinet), corresponding to the machine weight. Shock absorbers should be previously attached to housing bottom by four screws with washers.

Place of machine installation should not be accessible to children and disabled people.
All works upon machine connection to electric mains and putting into operation should be performed by specialized service company personnel in accordance with “Electric Installation Code”, “Regulations for Operation of Consumer Electrical Installations” of TCP 181-2009 (02230) technical code of common practice and “Interindustry labor safety rules”, that are applicable in the Republic of Belarus or in accordance with similar regulatory documents applicable in an importing country.

The machine should be connected through an input device with built-in automatic circuit breaker with overload current value of Inom. = 3.0 A.

Warranty liabilities

Warranty period (24 months) starts from the day of putting the machine into operation, but not later than 6 months from the date of machine purchase.

Manufacturing company eliminates malfunctions of the equipment during warranty period on the following terms:

All the requirements of “Operating Manual” for the machine have been observed.

Copy of signed “Act of machine commissioning” has been handed over (sent) to manufacturing company within 14 days from the day of putting the machine into operation.

Signed “Damage claim”, containing the information on machine malfunction, failure of its parts or utilities, has been sent to manufacturing company.

In case of non-observance of any of the above-mentioned terms, the manufacturing company disclaims all its warranty liabilities.

Note: the signed “Act of machine commissioning” and “Damage claim” shall be stamped by the consumer and by the company that performs repair and maintenance.